Home

G1200 Grinder

The Link G1200 produces a high precentage of 0.50mm (#30 mesh) crumb rubber in one pass, from 8mm feedstock

The G1200 Grinder is specifically designed to grind steel-free rubber chips (up to 8mm feedstock), without the overheating and low capacity problems generally encountered with conventional “plastics granulators” as traditionally used by tyre recyclers. The G1200 consists of two electric motors, each belt-driving two water cooled processing chambers, all mounted on a common table The discharged powder is suitable for screening and immediate sale or further processing.

Unique Features
The G1200 is compact, economical and simple to operate. It is designed to work most effeciently when being fed by the optionally available, overhead hopper, this hopper being fitted with individual, variable speed, feed aguers for each processing chamber.

The innovative cutting mechanism consists of a series of replacable, resharpenable fixed and rotating cutters of various profiles. The rotating cutters are mounted on a water-cooled, splined shaft and the fixed cutters retained within the water-cooled housing. All cutters can be readily accessed within minutes  for maintenance or replacement.

The ground rubber is discharged from the processing chambers into a common water-cooled trough auger, and from this auger, can be screened and bagged or deposited onto the FS2000 for fibre separation.

The G1200 can optionally be supplied with 2 granulating chambers and 2 grinding chambers (GR1600 Granulator/Grinder) or 4 granulating chambers (GRA2000), rather than 4 grinding chambers

Details PDF
English
Deutsch

[LINK Machines / Products] [Link Storage] [Link SH1500/3000] [Link FS2000] [Link G600] [Link G1200] [Link GR800] [Link GR1600] [Link PS 6000]