Home

FS 2000 Fibre Separator

The FS 2000 Fibre Separator is designed to meet the needs of recycling operators and municipalities for fibre-free⁽¹⁾ crumb rubber. This machine is designed to work in conjunction with Link’s secondary fibre separators as fitted to our SCR3000 Screen .

Unique Features
The FS 2000 is compact, economical and simple to operate. It is designed to process rubber powder at a rate of up to 2000 Kg per hour and after initial set-up, not require any operator interventon.

The rubber is moved across a series of trays on the table by means of a pair of vibratory motors attached to the underside of the table. Due to the tray profiles and vibratory action, the fibre is brought to the top of the rubber stream, where it is removed by a number of suction points suspended above the table.

The removed fibre is blown into a (optional) cyclone where it is wet down by water sprays around the cyclone inlet. The wet fibre and excess water is discharged from the base of the cyclone into a (optional) “Sweco” screen where the fibre is separated from the water and is discharged into an auger, the auger depositing the fibre into bulkbags for sale or disposal.

The cleaned water is returned to an (optional) water storage tank for re-use. The air discharged from the cyclone is filtered through a (optional) bag filter, to remove any remaining fibre, prior to release in the atmosphere

The same water storage tank can be used as a source of cooling water for our shredders and grinders, the cyclone serving the dual purpose of separating the fibre from the air stream and cooling the hot water returned from the shredders and grinders

The clean rubber is discharged from the fibre separator into an auger for screening and bagging.

Details PDF
English
Deutsch

[LINK Machines / Products] [Link Storage] [Link SH1500/3000] [Link FS2000] [Link G600] [Link G1200] [Link GR800] [Link GR1600] [Link PS 6000]